贝格斯 Hi-Flow 650P,Hi-Flow 650P

产品分类:导热材料

标  签:贝格斯Hi-Flow650P Hi-Flow650P

产品类型:全新 | 已有21111人关注


  • 特点与应用
  • 产品参数
  • 相关证明报告
  • 评价(8)
贝格斯 Hi-Flow 650P

导热系数:  1.5W

热阻抗:    0.2℃-in2/W(@25psi)

垫片材料厚度: 0.114-0.14mm/0.025-0.05mm

阻燃等级:  V-O

相变温度:  52℃

连续使用温度: -40℃+150℃

绝缘击穿电压: 5000V

性能:

配置可用

  • 辊型、模切件、片材形式
  • 用1,1.5或2毫米的聚酰亚胺增强载体

 

 

Typical Properties of Hi-Flow 650P
Property
Imperial Value
Metric Value
Test Method
Color
Gold
Gold
Visual
Reinforcement Carrier
Polyimide
Polyimide
***
Thickness (inch) / (mm)
0.0045 - 0.0055
0.114 - 0.140
ASTM D374
Film Thickness (inch) / (mm)
0.001 - 0.002
0.025 - 0.050
ASTM D374
Inherent Surface Tack (1 or 2-Side)
1
1
***
Elongation (%45o to Warp and Fill)
40
40
ASTM 882A
Tensile Strength (psi) / (MPa)
7,000
7,000
ASTM 882A
Continuous Use Temp (°F) / (°C)
-40 to 302
-40 to 150
***
Phase Change SofteningTemp (°F) / (°C)
126
52
ASTM D3418
Electrical
Dielectric Breakdown Voltage (Vac)
5000
5000
ASTM D149
Dielectric Constant (1000 Hz)
4.5
4.5
ASTM D150
Volume Resistivity (Ohm-meter)
1012
1012
ASTM D257
Flame Rating
V-O
V-O
U.L. 94
Thermal
Thermal Conductivity (W/m-K) (1)
1.5
1.5
ASTM D5470
Thermal Performance vs Pressure
Pressure (psi)
10
25
50
100
200
TO-220 Thermal Performance (oC/W) 0.0010"
1.20
1.15
1.11
1.06
1.00
TO-220 Thermal Performance (oC/W) 0.0015"
1.47
1.41
1.37
1.33
1.29
TO-220 Thermal Performance (oC/W) 0.0020"
1.59
1.48
1.43
1.38
1.35
Thermal Impedance (oC-in2/W) (2) 0.0010"
0.21
0.20
0.19
0.18
0.17
Thermal Impedance (oC-in2/W) (2) 0.0015"
0.23
0.22
0.21
0.20
0.20
Thermal Impedance (oC-in2/W) (2) 0.0020"
0.27
0.27
0.26
0.25
0.24

1) This is the measured thermal conductivity of the Hi-Flow wax coating. It represents one conducting layer in a three-layer laminate. The Hi-Flow coatings are phase change compounds. These layers will respond to heat and pressure induced stresses. The overall conductivity of the material in post-phase change, thin film products is highly dependent upon the heat and pressure applied. This characteristic is not accounted for in ASTM D5470. Please contact Henkel Product Management if additional specifications are required. 
2) The ASTM D5470 test fixture was used and the test sample was conditioned at 70°C for 5 minutes prior to test. The recorded value includes interfacial thermal resistance. These values are provided for reference only. Actual application performance is directly related to the surface roughness, flatness and pressure applied.


以下证明报告仅用于学习参考,请勿用于任何商业用途,模切网不承担由此产生的任何法律责任。

SGS报告:

MSDS报告:

材质证明:

4******5 评价于:2019/4/12 21:47:532019/4/5 18:02:41 购买
可不可以,不要用天天快递啊,下午就看到已经到我们这个地方,第二天才给送过来。
x****g 评价于:2018/10/30 15:21:172018/10/26 15:25:08 购买
价格优惠了,而且材料跟以前的一样
z***n 评价于:2018/8/1 11:28:222018/7/28 22:09:08 购买
在我们合肥这块材料都没你们价格有优势,长期合作。
w*********9 评价于:2018/4/21 15:26:412018/4/17 13:19:59 购买
挺好的,这种方式可以减轻我们的备货压力。
w*******k 评价于:2018/1/13 23:53:002018/1/6 20:17:22 购买
服务很到位
o***k 评价于:2017/8/29 13:19:542017/8/23 15:19:45 购买
预计这个材料下个月我们采购量会很大,提前给你们说一声。
g*****a 评价于:2017/6/7 17:45:212017/5/31 11:25:29 购买
货收到后,检查来了货还是没问题,就是外包装有点问题了,下次要注意啊。
k*******1 评价于:2017/3/2 23:26:552017/2/25 12:12:59 购买
品质还是不错的,价格也挺给力。
同类产品
分享此商城产品的方式